Camlock Gaskets - FKM
Item #: 100V
Your Price:
$6.77
/
each
ea
Listed Price:
$6.77
/
each
ea
The terms FPM, FKM and Viton® very often cause confusion and lead to incorrect interpretations. All of these designations actually stand for one single base material : fluoro rubber.
FPM is the international abbreviation according to DIN/ISO, whereas
FKM is the short form for the fluoroelastomer category according to the American standard ASTM.
Viton® is the registered trademark of DuPont Performance Elastomers.
MCC uses the designation FKM for all of its fluoro-elastomer materials.
The MCC Camlock Rubber Gaskets dimensionally comply with Mil Spec A-A-59326D
MCC Camlocks are supplied standard with nitrile material for use in temperatures above -30 °C.
The compression set after 22 hours @ 70°Centigrade will not exceed 60 percent when tested in accordance with ASTM D395.
Colour: Black (will have "V" embossed on the side of the gasket) or Red
FPM is the international abbreviation according to DIN/ISO, whereas
FKM is the short form for the fluoroelastomer category according to the American standard ASTM.
Viton® is the registered trademark of DuPont Performance Elastomers.
MCC uses the designation FKM for all of its fluoro-elastomer materials.
The MCC Camlock Rubber Gaskets dimensionally comply with Mil Spec A-A-59326D
MCC Camlocks are supplied standard with nitrile material for use in temperatures above -30 °C.
The compression set after 22 hours @ 70°Centigrade will not exceed 60 percent when tested in accordance with ASTM D395.
Colour: Black (will have "V" embossed on the side of the gasket) or Red